Kitplate 3D Studio

3D printed keychain ideas: 30 designs you can make in minutes

Name keychains, licence plates, pet tags with a QR code, gym plates and bookmarks: 30 3D printed keychain ideas, each a few clicks in your browser.

4 min read

  • Keychains
  • Ideas
  • Gifts
  • Pet tags
  • QR code
  • Bambu Lab

A keychain is the quickest gift a 3D printer makes: a name keychain prints in about a quarter of an hour, and a printed name or a pet's tag feels personal in a way a bought one doesn't. Below are 30 ideas, every one of them made in our Keychain Maker: type the text, pick the colours, and the model is ready to download as a 3MF for a Bambu Lab printer or as an STL.

The Keychain Maker switching between 30 designs: name keychains with badges, licence plates, pet tags with QR codes on the back, weight plates and bookmarks

Name keychains

The classic: a name on a base that follows its outline, with a hole for the ring. On its own it is already a gift; the three choices below make it look like it was made for one person.

  • The font sets the mood. A script such as Pacifico or Lobster for "Love", "Emma" or "Olivia"; a bold one such as Titan, Russo or Luckiest for "LIAM", "NOAH" or "Boo!". There are 16 fonts, and you can upload your own.

  • A badge says who it is for. Put one before the name, after it, or both: a car for Liam, a cat for Mia, a gamepad for Noah, a rose for Mom, a crown for Dad, a pumpkin and a bat for Halloween. There are 355 to pick from, and you can turn your own picture into one.

  • Two colours that contrast. Every colour in the picker is a Bambu PLA Basic filament: Red on Jade White, Pink on White, Pumpkin Orange on Black, Gold under black letters.

Change the base and the letters

  • Base: an outline that follows the letters, a plain plate (a rounded rectangle, good for short names like "Zoe"), or hexagons for a techy look.

  • Letters: raised on the base (the classic), inlaid flush into it, engraved into it, or cut right through it.

Licence plate keychains

A small copy of a number plate: an EU plate with its country band, a US plate with the state across the top, or a motorbike plate in two lines. Type the number ("MAX 2026", "LUCKY 7", "KR 77"), pick the plate's colours, and it reads like the real thing. A good gift for a new driver or with the keys to a new car.

Pet tags, with a QR code on the back

A tag for the collar in four shapes: round, a bone, a heart or a dog tag. The front carries the pet's name and your phone number. The round tag and the dog tag can also carry a QR code on the back: scanned, it calls your phone number or opens a link you choose, such as a page with the pet's details.

  • The QR code is printed into the tag's bottom layers in the second colour, so it stays flat and can't rub off. That shares layers with the base, so a QR code needs an AMS.

  • Every square of the code is at least 0.8 mm, two lines of the nozzle, so it prints sharp enough to scan; for a long link the tag grows rather than shrinking the squares.

Weight plate keychains

A tiny gym plate with a hole through the hub: text along the top and the bottom ("GYM" and "LIFT BRO?", or "BEAST" and "NO PAIN"), and the weight on both sides of the hub. A gift for anyone who never misses leg day.

Bookmarks

The same tool makes bookmarks: a ribbon with a notched end, a plain strip, or a topper that peeks out of the book, each with a hole for a tassel. "Happy reading", a book club's name or a child's name in a favourite colour.

Ideas by occasion

  • Birthdays: the name with a star, a crown or a cake.

  • Mother's and Father's Day: "Mom" with a rose, "DAD" with a crown.

  • Halloween: "Boo!" in Pumpkin Orange on Black, between a pumpkin and a bat.

  • Back to school: a name on every bag, so nobody's gets mixed up.

  • A new pet: a tag with a QR code that calls you.

  • A wedding or a team: one design, a different name on each; type them one after another and download each.

So it prints well

  • Letters at least 3 mm tall. Smaller ones blur into the base. The Keychain Maker warns you, and says what to change.

  • No strokes thinner than 0.5 mm. Very thin fonts lose parts of their letters; the tool flags them too. A bigger size or a bolder font fixes it.

  • Contrast over colour. A light base with dark letters, or the other way round, reads from across the room.

Make yours

  1. Open the Keychain Maker and pick a template: Name, Licence plate, Pet tag, Weight plate or Bookmark.

  2. Type the text, choose the font, the colours and, for a name, a badge.

  3. Under Export, choose your printer and With AMS or No AMS, and download the 3MF (or an STL). Downloads need a free account.

  4. Open it in Bambu Studio, slice and print.

More articles